FMC+ Mezzanine Card Vita 57.4 HSPC HSPCe breakout adapter

FMC+ Mezzanine Card VITA 57.4 HSPC HSPCe breakout adapter passive breakout adapter 14 x 40 560 pins

FMC+ Mezzanine Card VITA 57.4 breakout adapter using Samtec / Molex SEARAY series board-to-board connectors. Designed in 14 layer PCB for improved signal integrity meeting highest performance at affordable price. Supporting High Serial Pin Count, HSPC and High Serial Pin Count extender, HSPCe Vitsa 57.4 standard.

FMC+ - FPGA Mezzanine Card

SEAM - Male connector, typically resides on Host a.k.a HSPC HSPCe

SEAF - Female connector, typically resides on Mezzanine card (Daughter) a.k.a. HSPC HSPCe

FMC+ HSPC 14x40 pins totaling 560 pins
FMC+ HSPCe 4x20 pins totaling 80 pins

Best in class FMC+ HSPC HSPCe test modules catering FCI, Molex and Samtec connectors

Shipping worldwide

	ZX180CSI-HSPC FMC+ VITA 57.4 Connector Saver Debug &Interposer
	FMC+ VITA 57.4 HSPC connector saver and debug interposer designed to provide convenient access to selected FMC+ signals for measurement, debugging, and system isolation while maintaining the full VITA 57.4 interface and bandwidth. The interposer can be installed between an FPGA carrier (host) card and an FMC+ mezzanine (daughter) card, providing access to critical management, clocking, configuration, JTAG, I²C, differential I/O, and power-rail signals. Prividing Access to the followng signals via onboard shunts / test points enabling signal measurements and isolate Carrier or Mezzanine card. Management : PG_M2C PG_C2M CLK_DIR PRSNT_M2C Sideband : VREF_A_M2C VREF_B_M2C Differential clocks : REFCLK_M2C_P/N SYNC_M2C_P/N REFCLK_C2M_P/N SYNC_C2M_P/N I2C : SDA, SCL Configuration: GA0, GA1 JTAG: TCK TDI TDO TMS TRST_L TRST Clock Capable Differential I/O: LA00_P/N_CC which includes LA00_P_CC and LA00_N_CC LA01_P/N_CC LA17_P/N_CC LA18_P/N_CC HA00_P/N_CC HA01_P/N_CC HA17_P/N_CC HB00_P/N_CC HB06_P/N_CC HB17_P/N_CC Power Rails accessible through 4-termial SMD current sense shunts: 12V0, 3V3, VADJ, 3V3VADJ ZX180CSI-HSPC is designed: - Using 14 rows x 40 pins per column SEAF/SEAM connectors - Designed in 8 layers PCB - 50 Ω trace impedance controlled. - Includes both SEAM & SEAF connectors - Mates with Both Carrier ( Host ) and Mezzanine ( Daughter ) cards The onboard shunts and test points allow engineers to observe and measure selected signals without disrupting the high-speed FMC+ interface, making the ZX180CSI-HSPC useful for FPGA board bring-up, hardware validation, and troubleshooting. Lead time 3-5 weeks
	ZX180CSI-HSPC FMC VITA 57.4 Connector Saver Debug Interposer		$398

	ZX180-HSPC ZX180V-HSPC FMC VITA 57.4 Mezzanine card breakout adapter passive
	FMC+ HSPC FPGA Mezzanine card breakout adapter is offered in full signal access modules and VITA 57.4 signal access. ZX180-HSPC - Full Signal access module where all 560 pins are accessible via onboard 0405 SMD footprint ZX180V-HSPC - VITA 57.4 Signal access module where only VITA 57.4 Signals are accessible via 0405 SMD footprint. ZX180x-HSPC module is designed: - Using 14 rows x 40 pins per column SEAF/SEAM connectors - Designed in 14 layers PCB - 50 Ω trace impedance. - Includes both SEAM & SEAF connectors - Mates with Both Host and Daughter card It is designed to work with all designs using Vita 57.4 standards The ZX18x-HSPC is designed to operate at full Vita 57.4 bandwidth. Supporting full bandwidth operating frequency.
	ZX180-HSPC FMC VITA 57.4 Mezzanine card breakout adapter passive		$468
	ZX180V-HSPC FMC VITA 57.4 Mezzanine card breakout adapter passive		$468

	ZX181V-HSPC ZX181-HSPC FMC+ VITA 57.4 Mezzanine card breakout adapter passive
	FMC+ HSPC FPGA Mezzanine card breakout adapter is offered in full signal access modules and VITA 57.4 signal access. ZX181-HSPC - Full Signal access module is where all 560 pins are accessible via onboard 0405 SMD footprint ZX181V-HSPC - VITA 57.1 Signal access module is where only VITA 57.4 Signals are accessible via 0405 SMD footprint. ZX181x-HSPC module is designed: - Using 14 rows x 40 pins per column SEAM connector - Designed in 14 layers PCB - 50 Ω trace impedance. - Includes ONLY SEAM connector - Mates with Host ONLY It is designed to work with all Xilinx and 3rd parts FPGA systems as well as embedded applications using Samtec, Molex BGA connectors The ZX18x-HSPC is designed to operate at full Vita 57.4 bandwidth. Supporting full bandwidth operating frequency
	ZX181-HSPC FMC+ VITA 57.4 Mezzanine card breakout adapter passive		$398
	ZX181V-HSPC FMC+ VITA 57.4 Mezzanine card breakout adapter passive		$398

	ZX180-HSPCe ZX180V-HSPCe FMC VITA 57.4 Mezzanine card breakout adapter passive
	Coming Soon FMC+ HSPCe FPGA Mezzanine card breakout adapter is offered in full signal access modules and VITA 57.4 signal access. ZX180-HSPC - Full Signal access module where all 560 pins are accessible via onboard 0405 SMD footprint ZX180V-HSPC - VITA 57.4 Signal access module where only VITA 57.4 Signals are accessible via 0405 SMD footprint. ZX180x-HSPC module is designed: - Using 14 rows x 40 pins per column SEAF/SEAM connectors - Designed in 14 layers PCB - 50 Ω trace impedance. - Includes both SEAM & SEAF connectors - Mates with Both Host and Daughter card It is designed to work with all designs using Vita 57.4 standards The ZX18x-HSPC is designed to operate at full Vita 57.4 bandwidth. Supporting full bandwidth operating frequency. Lead time 4 weeks
	ZX180-HSPCe FMC VITA 57.4 Mezzanine card breakout adapter passive		$468
	ZX180V-HSPCe FMC VITA 57.4 Mezzanine card breakout adapter passive		$468