wire assembly - scope probe board to board interface

Set of 12 bare copper wire assemblies designed to interface with oscilloscope probes as well as standard pin headers and sockets. These assemblies provide a convenient solution for signal probing, debugging, and board-to-board interconnections in laboratory and test environments.

Features

    - 12 wire assemblies per set
    - Compatible with oscilloscope probes and standard board interconnects
    - Pin header uses 0.064" square pins

   Compatibility :
        Any standard 0.1" (2.54 mm) pitch, 0.064" square pin header or socket
        Any Tektronix Keysight single-ended and differential probes

Difference between ZX00BC2PH1 & ZX00BC2PH30 is the diameter of the bare copper wire used in the assembly. All other mechanical and electrical specifications are identical.

$18.85

$18.85

ZX100ACC-SS breakout adapter flying lead wire assembly Jumper

Flying Lead Wire Assembly – Set of 12 individual 28 AWG solid-core flying lead wires with a standard socket terminated at each end and insulated with heat-shrink tubing. These wire assemblies provide a convenient solution for signal probing, debugging, prototyping, and board-to-board interconnections.

Available wire lengths: 6", 9" and 12" inches (15, 23, 30 cm)

Please specify the desired length when ordering.

Compatibility

    - ZX1xx series breakout adapters
    - All Zebax breakout adapters
    - 0.025" square or round pin headers
    - Oscilloscope probes

Features
    - 12 individual flying lead wire assemblies per set
    - 28 AWG solid-core wire construction
    - Socket termination at both ends
    - Heat-shrink insulation for improved durability and handling
    - Ideal for prototyping, testing, measurement, and signal access applications

$18.85

5 inductor cable assembly 1.5mm pitch board to board cable assembly

5 individually wire assembly using 1.5mm receptacle ( socket ) pin complementing ZX200xx modules as well as general purpose application.

    - 5 individually wires - cable assembly
    - Connector pitch: 1.5mm
    - Mates with any standard 0.1" pitch, 0.064" SQ pin header

$18.85

$18.85

6 inductor cable assembly 1.5mm pitch board to board cable assembly

6 individually wire assembly using 1.5mm receptacle ( socket ) pin complementing ZX230Cxxx modules as well as general purpose application.

    - 6 individually wires - cable assembly
    - Connector pitch: 1.5mm
    - Mates with any standard 0.1" pitch, 0.064" SQ pin header

$18.85

SMA connector to 2 pin Socket cable assembly - high frequency

SMA Connector Cable Assembly converting an SMA connector to a 2-pin socket for general-purpose use or test equipment interfacing.

ZX00SMAS-P is an approved Keysight cable assembly for ≤2 GHz applications, including the Infiniium S-Series oscilloscopes, N7020A probe system, network analyzers, and other test equipment.

Specifications

    - Coax cable type: RG174
    - Connector interface: SMA to 2-pin socket
    - Pin socket: standard 0.1" (2.54 mm) pitch, 0.025" (0.63 mm) square pin

Compatibility

    - Keysight Infiniium S-Series oscilloscopes (≤2 GHz bandwidth)
    - Keysight N7020A probe system
    - General-purpose test and measurement applications requiring SMA-to-2-pin interface

$24.85

$24.85

$34.85

$38.85

$38.85

SMA connector to 2 pin header cable assembly - high frequency

SMA Connector Cable Assembly converting an SMA connector to a 2-pin header for use with Zebax HDMI, DisplayPort (DP), USB, ZX200 series modules, and other high-speed test and development applications.

ZX00SMAH / ZX000x1036 cable assembly converts an SMA signal (Signal + GND) to a 2-pin header, providing a convenient contact point for oscilloscope probing or interfacing with a device under test (DUT).

Specifications

    - Coax cable type: RG174
    - Pin header: standard 0.1" (2.54 mm) pitch, 0.025" (0.63 mm) square pin
    - Designed for ≤2 GHz bandwidth applications
    - High-quality SMA to 2-pin header signal interface

Applications

    - Zebax HDMI, DisplayPort, and USB ZX200 series modules
    - High-speed test and development platforms
    - Oscilloscope probe access points
    - General-purpose signal measurement and debugging

$18.85

$38.85

ZX000x03xx SMA to SMP 50 Ohms coax RF High Speed Cable assembly

SMA to SMP RF High-Speed Cable Assembly utilizing 50 Ω RG405 semi-rigid coaxial cable for demanding RF and microwave test applications. The assembly delivers exceptional signal integrity with an insertion loss of less than 0.2 dB at 20 GHz for an 8-inch (20 cm) cable length.

Designed for high-frequency measurement, characterization, and development applications requiring low loss, excellent shielding, and reliable RF performance.

Specifications

    - Connector A: SMA
    - Connector B: SMP
    - Cable type: 50 Ω RG405 semi-rigid coaxial cable
    - Cable length: 8 in (20 cm)
    - Insertion loss: < 0.2 dB at 20 GHz
    - Excellent impedance control and signal integrity

Applications

    - RF and microwave test systems
    - Network analyzer measurements
    - High-speed signal characterization
    - Laboratory and production test environments
    - Communication, aerospace, and defense applications

Please refer to the product datasheet for detailed S-parameter data and performance analysis charts.

$38.85

$48.85

$48.85

ZX00020308R SMA to Right Angle SMP 50 Ohms RG406 8" (20cm) long RF High Speed Cable assembly

SMA to  Right-Angle SMP RF High-Speed Cable Assembly utilizing 50 Ω RG405 semi-rigid coaxial cable for demanding RF and microwave test applications. The assembly delivers exceptional signal integrity with an insertion loss of less than 0.2 dB at 20 GHz for an 8-inch (20 cm) cable length.

Designed for high-frequency measurement, characterization, and development applications requiring low loss, excellent shielding, and reliable RF performance.

Specifications

    - Connector A: SMA
    - Connector B: Right-angle SMP
    - Cable type: 50 Ω RG405 semi-rigid coaxial cable
    - Cable length: 8 in (20 cm)
    - Insertion loss: < 0.2 dB at 20 GHz
    - Excellent impedance control and signal integrity

Applications

    - RF and microwave test systems
    - Network analyzer measurements
    - High-speed signal characterization
    - Laboratory and production test environments
    - Communication, aerospace, and defense applications

Please refer to the product datasheet for detailed S-parameter data and performance analysis charts.

$48.85

High Frequency semi-rigid SMA coaxial cable assembly

High-Performance Semi-Rigid Flexible Coaxial Cable Assembly designed for characterization, testing, and measurement of RF, high-frequency, and ultra-high-frequency signals from DC to 125 GHz.

This premium 50 Ω coaxial cable assembly provides excellent signal integrity, low insertion loss, and superior mechanical flexibility, making it ideal for validation, characterization, test and measurement applications.

Key Features

    - Frequency range: DC to 125 GHz
    - Insertion loss: better than −0.3 dB at 8 GHz
    - VSWR: 1.3:1 maximum
    - Characteristic impedance: 50 Ω
    - Minimum bending radius: 4.2 mm
    - Excellent signal integrity and RF performance
    - Suitable for RF, microwave, and millimeter-wave applications

Construction

    - Outer conductor constructed from tin-plated copper, allowing easy soldering to system ground planes, and shielding structures.
    - Semi-rigid flexible design combines excellent electrical performance

Available Configurations

    - SMA to Bare Wire
    - SMA to SMA

Excellent solution for RF signal analysis, characterization, validation, and test & measurement applications.

Please refer to the product datasheet for detailed S-parameter data, insertion-loss measurements, and performance analysis charts.

High Frequency semi-rigid SMA to bare wire coaxial cable assembly

ZX0002SRF4 High Frequency semi-rigid SMA to bare wire coaxial cable assembly - Length 4" ( 10cm )

$38.85

High Frequency semi-rigid SMA to SMA coaxial cable assembly

ZX000101C8 High Frequency semi-rigid SMA to SMA coaxial cable assembly - Length 9.5" ( 24cm)

$48.85

SMA to SMA RG405 50 Ohms RF high speed coax cable assembly

SMA to SMA RF High-Speed Coaxial Cable Assembly utilizing 50 Ω RG405 coaxial cable for excellent signal integrity and low-loss performance. The cable assembly is ideal for system bring-up, debugging, RF testing, signal characterization, and measurement applications from DC to 20 GHz.

Designed for demanding test and measurement applications, the assembly provides reliable impedance control and consistent RF performance across a wide frequency range.

Specifications

    - Connector type: SMA to SMA
    - Cable type: 50 Ω RG405 coaxial cable
    - Frequency range: DC to 20 GHz
    - Insertion loss: ≤ 0.2 dB at 8 GHz
    - Excellent impedance matching and signal integrity

Available Configurations

    - SMA Jack to SMA Jack
    - SMA Jack to SMA Plug
    - SMA Plug to SMA Plug

Applications

    - System bring-up and debugging
    - RF and microwave measurements
    - Network analyzer testing
    - Signal integrity characterization
    - Test and measurement
    - General-purpose high-frequency interconnect applications

Please refer to the product datasheet for detailed S-parameter data and performance analysis charts.

$38.85

$38.85

$38.85

ZX000x0408 SMA to SMP Jack 50 Ohms coax RF High Speed Cable - 8" long

SMA to SMP Jack RF High-Speed Cable Assembly utilizing 50 Ω RG405 coaxial cable for low-loss, high-performance RF signal transmission. Designed for test, measurement and characterization applications from DC to 20 GHz.
,
The assembly provides insertion loss of ≤ 0.2 dB at 20 GHz, making it an excellent choice for precision instrumentation, signal analysis, and RF test & measurements applications.

Specifications

    - Connector A: SMA
    - Connector B: SMP Jack
    - Cable type: 50 Ω RG405 coaxial cable
    - Frequency range: DC to 20 GHz
    - Insertion loss: < 0.2 dB at 20 GHz
    - Excellent impedance matching and signal integrity performance

Compatibility

    - Mates with ZX000x3xx cable assemblies
    - Compatible with standard SMP cable assemblies
    - SMP Jack interface is identical to the SMP connector commonly used on PCBs and host systems

Applications

    - Insertion loss measurements
    - RF instrumentation signal test and measurement
    - Signal integrity analysis , characterization, validation

Please refer to the product datasheet for detailed S-parameter data and performance analysis charts.

$68.00

SMA to SMA RG316U coax cable 50 Ohms high speed cable assembly

SMA to SMA Coaxial Cable Assembly utilizing 50 Ω RG316/U coaxial cable for high speed signal test and measurement and interconnect applications. The cable assembly is ideal solution for system bring-up, debugging, testing, and signal characterization from DC to 6 GHz.

Designed for general-purpose RF applications, the assembly provides a cost-effective solution while maintaining excellent electrical performance and flexibility.

Specifications

    - Connector type: SMA to SMA
    - Cable type: 50 Ω RG316/U coaxial cable
    - Frequency range: DC to 6 GHz
    - Flexible and durable cable construction
    - Excellent impedance matching and signal integrity

Applications

    - System bring-up and debugging
    - RF and microwave measurements
    - Signal integrity , validation, characterization
    - Production test environments
    - General-purpose RF interconnect applications

Please refer to the product datasheet for detailed S-parameter data and performance analysis charts.

$24.85

$34.85

SMA to bare wire coaxial Cable Assembly utilizing 50 Ω RG316/U coaxial cable for high speed signal test and measurement and interconnect applications. The cable assembly is ideal solution for system bring-up, debugging, testing, and signal characterization from DC to 6 GHz.

Designed for general-purpose RF applications, the assembly provides a cost-effective solution while maintaining excellent electrical performance and flexibility.

Specifications

    - Connector type: SMA Jack or SMA Plug
    - Termination: Bare wire, solder dipped
    - Cable type: 50 Ω RG316/U coaxial cable
    - Frequency range: DC to 8.5 GHz
    - Cable length: 6 in (15 cm)
    - Flexible and durable cable construction

Applications

    - System bring-up and debugging
    - RF and microwave measurements
    - Signal integrity , validation, characterization
    - Production test environments
    - General-purpose RF interconnect applications

Please refer to the product datasheet for detailed S-parameter data and performance analysis charts.

$34.85

ZX00SMA-IPEX SMA Jack/Plug to IPEX Coax cable assembly

SMA Jack/Plug to I-PEX MHF MHF4L Cable Assembly utilizing high-quality 1.3 mm coaxial cable. Designed for high-frequency signal interface, wireless connectivity, signal integrity, validation, characterization, test & measurement applications.

Ideal for clock and data stimulus, signal analysis, as well as CSI, DSI, 2.4 GHz, and 5 GHz antenna applications.

Specifications

    - Connector A: SMA Jack or SMA Plug
    - Connector B: I-PEX MHF 4L
    - Cable type: High-quality 1.3 mm coaxial cable
    - Characteristic impedance: 50 Ω
    - Compact, low-loss RF cable assembly

I-PEX MHF 4L Compatibility

    - Plug: 20565-001R-13
    - Plug: 20572-001R-008
    - Mates with receptacle: 20449-001E

Applications

    - Clock and data stimulus
    - RF signal analysis and characterization
    - CSI and DSI interfaces
    - 2.4 GHz and 5 GHz antenna connections
    - Wireless communication systems
    - Embedded system development and validation
    - General-purpose RF and high-speed test applications

$19.85

$19.85

ZX050Rx 0.25W and 2W precision 50 Ohms SMA termination - 0 to 10GHz

Precision passive SMA termination RF load in 1/4W and 2W power ratings.

Connector Design:    Precision
Connector:       SMA Plug ( Male )
Electrical Load:     49.9 Ohms 1% precision
Maximum input power:    250mW   - ZX050R-10GHz
                                              2W - ZX050R2-10GHz

ZX050Rx mate with any standard SMA connector, ideal for high frequency operation.
Offering 49.9Ω tolerance 1% load impedance for signal bandwidth of DC to 18GHz applications.
Optimized for RF / high frequency applications with Maximum of 1.2dB insertion loss at 10+GHz.

Exceptional SMA termination load module due to built-in gold plating for enhanced durability and performance.

SMA Type: Plug ( SMA Male )

$18.85

$18.85

Wrench Torque designed for standard SMA connector 5/16" ( 8 mm) complementing ZX200xxx module and any/all applications requiring SMA connector using precision and consistent tension for purpose of repeatability of instrumentation test where accuracy is optimum goal in any electrical measurement.

Precision 0.9NM 1% torque for tension control.

Designed for 5/16" ( 8 mm)

Designed to fit standard SMA Plug connector.

In compliance with ISO-6789:2003 & ASME B107.14M standards

$125.00

USB type C power delivery cable assembly designed for ZX230CPD USB Type C power delivery module or 3rd party USB type C power delivery module.
Zebax USB ZX230C type C breakout adapter ( test board ) provides total solution in power delivery measurement as well as signal analysis and compliance test.

$48.00

$48.00

Jumper wire assembly with pin header and socket using 22 gauge wire.


Wire : Solid core 22 gauge
Pin header: 0.025" ( 0.63mm) SQ pin.
Pin length : 0.23" ( 5.83mm )

$8.85

Jumper wire assembly with pin header , socket pin with 1.2K Ω 1% using 22 gauge wire.

Wire : Solid core 22 gauge

Pin header: 0.025" ( 0.63mm) SQ pin.

Pin length : 0.23" ( 5.83mm )

$8.85

ZX000 Labor costs - Special board to board stitching rework

Assembly technician services are offered for special board to board stitches requiring professional technician.

All our reworks are completed in our assembly house by professional technicians.

Please email us your special rework instruction for rework quotation.

Labor cost per hour

$75.00